TOP 15 best alloy wheels: quality rating 2021-2022 and what brand to choose

All beginner car enthusiasts sooner or later are faced with the need to replace one or more discs.

It is difficult for a beginner to understand this question. What company to choose?

What size to buy? Cast or stamped products? Are there proven and reliable models?

We have compiled a ranking of the best alloy wheels in terms of price/quality ratio to help you make your choice in 2021-2022.

Top 15 best alloy wheels for 2021-2022

Place	Name	Price
Top 5 best alloy wheels for 2021-2022 by price/quality
1	K&K Meander	Check price
2	Konig Illusion	Ask the price
3	RIAL Lucca	Ask the price
4	Inforged IFG25	Ask the price
5	ALCASTA M04	Learn the price
Top 5 Best Premium Alloy Wheels
1	Inforged IFG17	Check price
2	Mak Wolf	Check price
3	DEZENT TZ	Ask the price
4	1000 Miglia MM1009	Ask the price
5	BBS SR	Check out the price
Top 5 best budget alloy wheels
1	Nitro Y-9100	Check out the price
2	LS Wheels LS784	You can find out the price of
3	SKAD KL-320	Ask the price
4	Proma Colosseum	Ask the price
5	SKAD Amsterdam	Ask the price

How to choose alloy wheels?

When purchasing alloy wheels for your car, be sure to consider the following parameters:

1. Manufacturer. You should not try to save money and buy discs from unknown manufacturers. It can cost you suspension and additional expenses. Below we have given a short list of the most popular brands, in the reliability of which you can not doubt.
2. Design. Here, focus on your taste.
3. Appearance. Before buying, be sure to inspect the discs from all sides, make sure they are intact. It is desirable that each disk was in a secure package.
4. Conformity to Parameters. Please refer to the vehicle documents for the correct fit for your vehicle. Check the mounting diameter, number and diameter of holes for the fasteners.
5. Span. In the marking it is marked at the end, before the diameter of the center hole. The parameters of departure are strictly regulated by the car manufacturer and it is not recommended to violate the recommendations, as they are directly related to the kinematics of the suspension. When discs with a wrong offset are installed, the loads change dramatically, due to which the turns become unpredictable, and the steering becomes heavy.

Top 5 best alloy wheels for 2021-2022 by price/quality

K&K Meander.

Cast discs of elegant appearance, from the Russian manufacturer. Each wheel weighs 8050 grams. Diameter width is 6, the model is available with the popular diameter of 15 or 16.

Four holes are used for mounting. The discs are suitable for many popular cars, such as domestic Lada XRay and Lada Vesta, as well as foreign Hyundai Solaris, KIA Rio, Volkswagen Polo and many others.

The manufacturer recommends using these discs with tires that have a high profile, given the quality of Russian roads.

The model is available in two colors - Silver SK and Diamond Black SK, which allows you to install it on many cars, regardless of their design and coloration.

Main characteristics:

1. Rim width (J) - 6.
2. Diameter of the rim (D) - 15/16.
3. Number of holes for mounting - 4.
4. Cast in a lightweight alloy.

Konig Illusion

A great option for use on cars and SUVs, good Suitable for drifting and unusual tuning, as well as doing a great job of giving the vehicle a sporty and aggressive style.

The model is available in silver and black colors, the black products have accents of steel shade.

The manufacturer is the American concern Pan Mar, which is famous for the high quality of its products, while setting affordable prices for them.

The discs are spectacular, with a striking design.

They have excellent dynamic characteristics, well tolerate intense physical. The design is represented by ten spokes, five holes are available for mounting. The manufacturer gives one-year guarantee.

Main characteristics:

1. The rim width (J) - 7/8.
2. Rim diameter (D) is 17/18.
3. Number of fastener holes - 5.
4. Cast in a lightweight alloy.

RIAL Lucca

Coal-black alloy wheels for passenger cars and SUVs, the design of which presented by five thin double spokes.

Manufactured by a popular German company, using modern equipment. The discs are light, beautiful, with a strong and reliable construction.

Experts note that the model perfectly adapts to any mechanical effects, such as shocks or compression, for example under the influence of temperature.

The elegant design became available due to improved geometric characteristics. The discs are perfectly flat and designed for a long service life. And due to the several available sizes, it's easy to find the right one for your car.

Main characteristics:

1. rim width (J) - 6,5/7,5/8.
2. Rim diameter (D) - 16/17/18/19.
3. Number of holes for mounting - 4 or 5.
4. Cast in a lightweight alloy.

Inforged IFG25

Silver die-cast rims with classic design based on five slim twin spokes.

Looks very impressive, but not aggressive, suitable for installation on passenger cars, including sports variants, and off-road vehicles. Discs are not afraid of high speed, even under load, eliminating any chatter on the road, which is provided by the perfect geometry.

As mentioned above, the discs are often installed on jeeps, crossovers, are not afraid of off-road, well able to withstand mechanical damage, not afraid of exposure to temperatures.

The presented line of sizes will allow using this model even on luxury cars. The manufacturer provides an official guarantee for one year, for mounting is available five holes.

Main characteristics:

1. rim width (J) - 7,5/8/8,5.
2. Rim diameter (D) is 17/18/19/20.
3. Number of mounting holes - 5.
4. Cast from a light alloy.

ALCASTA M04

This model is made in Asia, the manufacturer tries to take into account the main features of the Russian climate.

Bright, stylish appearance, the design uses a combination of five thin twin spokes and three popular shades - black, red and silver. They look good on sports models, have perfect geometric characteristics, thanks to which the car drives smoothly and smoothly at high speed.

However, when driving off-road a run-out is noticed, so you should carefully monitor this moment.

Decorative coating, which is used in the production of the model, is durable and does not suffer from the effects of chemical or weather factors.

It does not crack in cold weather, does not come off after rain or snow mixed with chemicals.

Compatible with various cars due to its visual and structural compatibility, the discs are mounted by means of four or five holes (the number depends on the chosen size).

Main features:

1. Rim width (J) - 5,5/6/6,5
2. Rim diameter (D) - 14/15/16/17.
3. Number of holes for mounting - four or five.
4. Cast in a lightweight alloy.

Top 5 Best Premium Alloy Wheels

Inforged IFG17.

Among the most popular and reliable premium alloy wheels, it is impossible not to mention Inforged..

In addition to the luxury segment, this model is also installed on mid-size cars.

Modern light-alloy compounds are used in production. Innovative technology has made it possible to achieve a long service life.

The discs have a beautiful design that will fully complement the exterior of your car, but the stylish appearance is not the only feature of the model.

Owing to the structural strength and five thin spokes of double type, these discs can withstand mechanical aggression, impacts and compression..

A car with such disks and high profile tires can easily go off-road without serious damage.

Main characteristics:

1. rim width (J) - 7,5/8/8,5/9.
2. Rim diameter (D) - 17/18/19.
3. Number of holes for mounting - 5.
4. Cast in a lightweight alloy.

Mak Wolf

This model is very popular among motorists due to the ratio price and quality.

Italian production, modern materials and equipment used during the technological process allow you to get cast discs for long-term use.

At the same time, the appearance is not much inferior to the standard set, which does not violate the harmony of the design of your car. And thanks to a wide choice of sizes, you can easily find the right parameters.

In addition to beautiful, resistant paintwork, which is resistant to aggressive environmental influences. The model has 10 curved, thin spokes.

Five holes are available for mounting, high structural strength is noted. The manufacturer offers a year of official warranty, the model is available in color Titanium.

Main features:

1. rim width (J) - 6,5/7/7,5/8.
2. Rim diameter (D) - 16/17/18/19/20.
3. Number of fastener holes - 5.
4. Cast in lightweight alloy.

DEZENT TZ.

Another popular model of alloy wheels among premium cars, which Made by a German company using modern equipment and high quality alloys.

Yes, the discs have a beautiful appearance, but this is not their only advantage.

The model is characterized by high structural strength due to the evenly distributed load on ten thin spokes of twin type.

Available in three colors - light silver, gray and black.

The discs can withstand high speeds and a wide variety of loads, thanks to their high dynamic performance with all kinds of tires.

Users and experts say that these disks are adapted not only for European roads and weather conditions, but also comply with Russian standards.

However, keep in mind that the outside of the product is convex, so you should move carefully along the curbs to avoid scratching the paint coating.

Main features:

1. Rim width (J) - 6/6.5/7/7.5/8.
2. Rim diameter (D) - 15/16/17/18/19.
3. Number of fastener holes - four or five.
4. Cast in a lightweight alloy.

1000 Miglia MM1009.

Black or silver alloy wheels fit perfectly into the design of your car if Belongs to the luxury or midsize segment..

They have five holes for fixing, the construction consists of a solid rim and ten thin spokes in the form of a Latin letter "Y". This allows the load to be distributed evenly and withstand it without deformation, so this model is an example of high mechanical strength.

Discs are designed for long running life and will last for several seasons.

The manufacturer provides an official one-year warranty.

Before you buy, please note that the center hole of the disc is adapted to the original BMW insert.

Main characteristics:

1. Rim width (J) - 7/8/8,5/9.
2. Rim diameter (D) - 17/18/19/20.
3. Number of holes for mounting - 5.
4. Cast in a lightweight alloy.

BBS SR

The German manufacturer BBS presents the SR model, which is installed on luxury and sports cars.

The technologies used have repeatedly been tested in motorsports at the professional level, so the brand can guarantee high quality and reliability of the product.

In addition to the beautiful appearance, alloy wheels have a number of features that are noted by customers and experts alike.

The surface of the discs is perfectly smooth, polished by diamond technique. The coating and construction of the product shows resistance to aggressive influences, it is not afraid of shocks or breaking loads.

They are evenly distributed by Y-shaped spokes, thin and in the number of five. Also the manufacturer managed to reduce the expected weight of the discs by means of calculating the peculiarities of construction by the computer program.

Main characteristics:

1. rim width (J) - 10/7/7.5/8/8.5/9.
2. Rim diameter (D) - 16/17/18/19.
3. Number of holes for fasteners - 5.
4. Cast in a lightweight alloy.

Top 5 best budget alloy wheels

Nitro Y-9100

This model of alloy wheels is made of a special alloy. At its core is pure aluminum, silicon and several alloying additives (magnesium, boron, strontium).

They increase the strength of the model, it is not afraid of negative external effects.

Constructional reliability is achieved by casting at high pressure and temperature..

After casting, the rims are ground, and then they undergo two levels of inspection to detect defects before the product is released for sale.

After painting, there is one additional inspection. This thoroughness keeps defect rates to a minimum. The discs do not crack from minor impacts, nor do they suffer from the effects of compression.

Main characteristics:

1. Rim width (J) - 6/6.5/7/7.5/8.
2. Rim diameter (D) - 15/16/17.
3. Number of fastener holes - 5.
4. Cast in lightweight alloy.

LS Wheels LS784.

Good budget option cast discs of Asian production, but taking into account Features of our climate and roads.

Show well throughout the life of the operation, there is no effect on the steering, the wheels remain responsive to steering commands. The design is represented by a dozen Y-spokes that distribute the load evenly.

Users note that, despite the budget price of the set, the discs resist mechanical impact well, and the quality of the coating is not questionable, it does not suffer from high or critically low temperatures, not afraid of the impact of reagents.

The company has its own quality standards, so each product undergoes a series of checks and compliance requirements, which ensures its reliability and safety.

Main characteristics:

1. Rim width (J) - 6,5/7/7,5.
2. Rim diameter (D) - 15/16/17.
3. Number of fastener holes - four or five.
4. Cast in a lightweight alloy.

SKAD KL-320

Cast disc model in black, the outer side of the product has a color of polished aluminum.

Beautiful, slightly aggressive appearance, combined with the strength and durability. The model is made in Russia, which means it is perfectly adapted to the weather and road conditions of our country.

These wheels are often installed on sports cars, as they can withstand extremely high speeds, while not causing problems with handling..

The mechanical action is distributed evenly throughout the entire structure by ten wide spokes, which reduces the load and avoids serious breakage. Persistent decorative coating does not crack, crumble or dull over time.

Main characteristics:

1. Rim width (J) - 6.
2. The diameter of the rim (D) - 15.
3. Number of holes for mounting - 4.
4. Cast in a light alloy.

Proma Coliseum

The company, which in the nineties supplied parts for racing cars, has now has moved on to mass production of alloy wheels for cars of all classes..

The production has four degrees of control of the products, including X-rays. Such thoroughness reduces the number of defects and technical flaws.

Therefore, the discs are able to provide stability and safety on the road, even with uneven pavement.

The alloy composition can be found in aluminum, silicon, titanium, boron and strontium.

Thanks to this composition, these alloy wheels are much stronger and more durable than other analogues, approaching the characteristics of forged discs.

The coating is polymer, which gives the model a high adhesion and an excellent degree of protection against rust. And due to the paint coating used a chrome effect is created.

Main characteristics:

1. Rim width (J) - 5,5/6/6,5.
2. Rim diameter (D) - 14/15.
3. Number of holes for mounting - four or five.
4. Cast in a light alloy.

SKAD Amsterdam

Concluding our rating of budget models of alloy wheels for 2021-2022, it is impossible not to mention This model from the brand SKAD..

It is presented in two colors - silver and graphite, features a classic, but solid appearance, with technical characteristics that provide strength and durability.

These disks are produced in Russia, so the manufacturer has managed to take into account all the road and natural peculiarities of our country, creating a "national" casting..

The product perfectly withstands the load, including at considerable speed, does not damage the rubber when colliding with curbs or joints, the mechanical impact is distributed throughout the entire structure, represented by the rim and a dozen thin spokes.

The decorative coating is very resistant, does not deteriorate from reagents or frost, does not come off under the influence of heavy precipitation.

Main characteristics:

1. rim width (J) - 7.
2. Rim diameter (D) - 17.
3. The number of holes for fasteners is five.
4. Cast in a light alloy.

What company to choose?

We recommend first of all to consider cast discs from these manufacturers:

1. SKAD - A Russian brand with a rich assortment, whose products have repeatedly in independent tests bypassed their competitors. High-strength alloys are used, and the coating is not afraid of scratches and microcracks.
2. K&K or KIC - Another Russian manufacturer, which offers affordable prices, high quality and reliability. They are made on German equipment.
3. ALCASTA - The company offers a classic range with restrained design. Light alloy wheels, with excellent balance even from the factory, but the coating cracks in hard frost.
4. BBS - German manufacturer, offers classic or retro design. The discs are load resistant, stable at high speeds.
5. RIAL - RIAL meets all safety standards, is stable, does not make the steering wheel heavy. Perfectly compatible with European, American and Asian cars.
6. Konig - is a brand that produces alloy wheels for all classes of cars. They offer both classic and bright designs, including for sports models. They are stable, reliable and have a steady coating.

What's better - stamped or alloy wheels?

Stamped discs are the most inexpensive and popular options, they are used as a basic set of any budget car. They are made of steel, covered with enamel, and most often they are covered with plastic hubcaps.

Stamped rims are purely functional products. They do not break on impact, but crumple, so they can be easily repaired without loss of reliability. However, their weight is much higher than other types, and their appearance is not very good.

Alloy wheels are first and foremost attractive because of their varied appearance. For the manufacture uses an alloy, most often made of aluminum. Due to the variety of shapes and lightness, cast discs are not inferior to the "stamp" in popularity.

However, they have a significant disadvantage - on impact, they crack rather than crumple. And although it is possible to weld the crack, no one will give you a guarantee that the reliability of the model will remain.

Therefore, if you are a frequent guest on the off-road, alloy wheels are worth bypassing. And for urban conditions or fans of attractive appearance and low weight they will be a great option, while not hitting you on the pocket too much.

Customer Reviews

Helpful video

From the video you will get an overview of the best alloy rims: