ТOP 20 best sliding compound mitre saws: price/quality ranking 2021-2022 and which combination model to choose for your home

During the repair or construction of the house, it is often necessary to cut at a certain angle as wooden workpieces, as well as thin metal, plastic.

In this case, you can not do without a crosscut saw.

But for it to give the desired results, the tool must be of high quality, safe, simple and easy to use.

Just with such parameters in mind and was compiled our rating, which included the best models of such a device in the price/quality ratio according to users and experts.

Rating TOP 20 best crosscut saws 2021-2022

Location	Name	Price
Top 4 best crosscut saws for home based on price/quality in 2021-2022
1	Metabo KGS 216 M	See price
2	Metabo KGS 254 M	Expected price
3	Makita LS1040	Find out how much.
4	Makita LH1040F	Find out the price
Top 4 best sliding compound mitre saws
1	BOSCH GCM 800 SJ	To know the price
2	Metabo KGS 305 M	Expected price
3	BOSCH GCM 8 SJL	You can find out the price of
4	Makita LS0714	Find out the price
Top 4 best inexpensive mitre saws
1	Metabo KS 216 M Lasercut	To know the price
2	ZUBR ZPT-255-1800 PL	To know the price
3	ZUBR ZPT-210-1600 PL	Ask the price
4	Wortex MS 2116 LM	Ask the price
Top 4 best professional mitre saws
1	Makita LH1040	Learn the price
2	Makita LH1201FL	Check out the price
3	BOSCH GCM 8 SDE	Check out the price
4	Metabo KGS 315 Plus	Find out the price
Top 4 best cordless mitre saws
1	RYOBI EMS190DCL	Find out the price
2	Metabo KGS 18 LTX 216 0	Find out the price
3	Einhello TE-MS 18/210 Li-0	Find out the price of
4	Makita DLS600Z	Find out how much.

How to choose a crosscut saw for your home?

When choosing a crosscut saw, assess its ease of use, power and safety.

The following features are worth considering:

1. Power. From 1000 to 1300 watts - saws for beginners and amateurs, able to cope with simple household tasks. 1600-2500 W - professional tools.
2. Turning speed of the disc. The lower it is, the more accurate the cut and less dust in the process. Good values are 3000-4500 rpm.
3. Material types. Not every model can cope with metal, even if it will be thin aluminum. Be sure to clarify this point before buying.
4. Type of power. If you often have to work in open areas, it is worth looking at the battery models.
5. Engine protection. Smooth, jerk-free engine starting and braking during heavy loads are important.
6. Additional features. These include the laser marker, backlight, connection of the vacuum cleaner. Thanks to this, the management of the saw and work with materials is as comfortable as possible.

Top 4 best crosscut saws for home cut-off saws by price/quality for 2021-2022

Metabo KGS 216 M

Popular model from the Japanese manufacturer, which differs from its competitors Thought-out design for maximum comfort of use.

High-quality materials, a robust aluminum alloy body and optimal power of 1500 W with a steadily working motor indicate a long service life of the device.

The molded sole and additional clamps provide a secure hold, and the laser marker and bright LED light can be used to keep the cut precise and straight.

Operating the saw is very easy, it is equipped with an ergonomic handle with rubber pads, thanks to which the tool does not slip in the palm.

Because of the large number of settings and functions, the model is also suitable for professional use, easily coping with wood, plastic, tile and aluminum profiles/sheets.

Key Features:

1. Saw power 1.5 kW.
2. Blade speed 5000 rpm.
3. Diameter of disc - 216 mm.
4. Whether it works with metal - yes.
5. Weight - 13.5 kg.

Metabo KGS 254 M

This model from a well-known manufacturer refers to semi-professional models and Equipped with a 1.8 kW motor.

Often used in workshops, bought for trips to construction sites. The disk rotates at a speed of 4.5 thousand revolutions per minute, does not make much noise and dust. There is a special vacuum cleaner, connects to an industrial vacuum cleaner.

For comfortable operation, the manufacturer has taken care of the laser marker and LED backlighting..

The tool is complemented by a wide range of equipment, the body is equipped with additional supports, so it was possible to work with long and wide workpieces.

Power of the tool is enough not only for plastic and hardwood, but also for non-ferrous metals. Cast aluminum body and soleplate provide long life.

Main features:

1. Saw power is 1.8 kW.
2. Turning speed of disc - 4500 rpm.
3. Diameter of the disc - 254 mm.
4. Whether it works with metal - yes.
5. Weight - 16.3 kg.

Makita LS1040

This model will cope with the cutting of wood, plastic and profiles made of thin aluminum, It is a good helper for woodworkers who prefer to make and repair furniture..

Often used when installing doors or perfectly cutting baseboards. The saw turns 52 degrees and tilts up to 45 degrees.

Powered by the mains, the power of the tool is 1650 watts.

If the saw blade gets stuck in the working material, the motor slows down and stops on its own.

The housing is not heated under steady load, the motor is stable and runs without interruption.

For comfortable cutting of long workpieces there are additional supports, and the soleplate is made of cast aluminum, has a comfortable pattern and will last a long time.

The blade is replaceable and rotates at 4,600 rpm.

Key Features:

1. Saw power is 1.65 kW.
2. Speed of the disc - 4600 rpm.
3. Diameter of the disc - 260 mm.
4. Whether works with metal - yes.
5. Weight - 11 kg.

Makita LH1040F.

An excellent cutter that doesn't need to be calibrated and is capable of delivering High performance and excellent cut quality right out of the box.

Robust construction, a powerful 1650 W motor and double safety insulation make this crosscut saw one of the most popular models in 2021-2022.

This model is also suitable for use in a small workshop and for repair work in homes and apartments.

Easily cope with hardwood, aluminum, plastic, laminate.

The motor spins the disk at 260 mm with a speed of 4800 rpm. It starts smoothly, gradually increasing power.

The working surface is illuminated by fluorescent lamp, which is inferior in brightness to LED backlighting, but it is enough for review.

It is possible to connect an industrial vacuum cleaner, all debris is collected in a special dust collector.

Main characteristics:

1. Power of the saw - 1.65 kW.
2. Speed of disk rotation - 4800 rpm.
3. Diameter of the disc - 260 mm.
4. Whether it works with metal - yes.
5. Weight - 13.7.

Top 4 best mitre saws with broach

BOSCH GCM 800 SJ

The German brand is popular among buyers for a reason.. This model is well assembled, Fully maintainable, prednanachena for standard saw blades at 216 mm.

The engine capacity of 1.4 kW, it is enough for repair work and use of the tool in small shops.

Compact dimensions and low weight allow free transport in the trunk of the machine.. The device is connected to the mains, the length of the cord is 2 meters.

The engine starts smoothly, there is a lock against accidental start. If the saw blade gets caught in the workpiece, the motor stops, reducing the load and protecting the tool from breakage.

Operation is simple, large handle with rubber pads provides a firm grip.

The case is assembled from high quality plastic, easy to change the drive, the kit comes with a special key.

Main features:

1. Power of saw - 1.4 kW.
2. Speed of the disk - 5500 rpm.
3. Diameter of the disc - 216 mm.
4. Whether works with metal - yes.
5. Weight - 13.5 kg.

Metabo KGS 305 M

Professional model of crosscut saw with a powerful motor of 2 kW and disc rotation up to 3700 rpm.

Suitable for work with hard wood, plastic and non-ferrous metals.

Because of its large size and weight it is used only on the table, the body is equipped with additional supports, which are indispensable when working with wide and long workpieces.

It is worth noting the good factory calibration, the tool can be used right out of the factory box. The saw is functional, the manufacturer has taken care to make it as convenient as possible.

There is a bright backlight, laser marker, can be connected to a vacuum cleaner. Ergonomic handle fits comfortably and securely in the palm of your hand, there is a spindle lock and smooth motor braking.

Ventilation holes quickly cool the internal mechanism and prevent overheating during prolonged use.

Key Features:

1. Power of saw - 2 kW.
2. Speed of disk - 3700 rpm.
3. Diameter of the disc - 305 mm.
4. Whether it works with metal - yes.
5. Weight - 19.6 kg.

BOSCH GCM 8 SJL

A worthy representative of German manufacturing, which has a recognizable quality The drive is assembled and the internal mechanisms are robust..

The 1600 watt motor spins the blade at 5,500 rpm, the housing has a clever venting system so it doesn't overheat during extended use.

It works with plastics, wood (including hardwoods) and non-ferrous metals..

The saw is fully repairable, all necessary parts can be found on the manufacturer's website. Accuracy of cutting and cutting is ensured by the installed laser marker, and dust and sawdust are removed by means of a vacuum cleaner connected through an adapter.

This saw is often used for repairs or in small workshops. The tool does not need to be calibrated and is ready to work right out of the factory box.

Key Features:

1. Power of saw - 1.6 kW.
2. Turning speed of blade - 5500 rpm.
3. Diameter of the disc - 216 mm.
4. Whether it works with metal - yes.
5. Weight - 17.3 kg.

Makita LS0714

A quality crosscut saw for use in construction or repair works.

Has a small power of 1010 W, has a blade with a diameter of 19 cm, which rotates in one minute 6 thousand times. It is used to work with wood and plastic materials, cuts well skirting boards and laminate.

Pretty compact in size and weighs 12.7 kg, fits in any trunk. It works with the mains, and the two-meter cord does not interfere with the installation of the tool on the table. It has a wide sole and reliable support for fixation.

Users praise this model for quality construction and good factory calibration.. The saw can be connected to an industrial vacuum cleaner, it is equipped with a dust bag.

There is also a spindle lock.

If necessary, the motor brakes and resets the saw blade until it comes to a complete stop to protect the tool from breakage.

Main features:

1. Power of saw - 1010 W.
2. Turning speed of disc is 6000 rpm.
3. Diameter of the disc - 190 mm.
4. Whether it works with metal - no.
5. Weight - 12.7 kg.

Top 4 best inexpensive mitre saws

Metabo KS 216 M Lasercut.

One of the smallest and lightest models in our ranking. Securely attaches to any surface by means of a wide molded base plate.

It has a spindle lock and the saw blade can be replaced in a few seconds if necessary.

The disc used has a diameter of 216 mm and rotates at up to 5000 rpm.. Since this is a benchtop tool, the two-meter long mains cable is sufficient for comfortable operation.

All controls are right in front of the operator and it is as easy as possible to operate the device.

The manufacturer has equipped the saw with a laser marker for cutting precision and a backlight, so that it is possible to work even in dim light.

A vacuum cleaner is available to remove dust and sawdust from the working surface.

Main features:

1. Saw power 1.35 kW.
2. Turning speed of disc - 5000 rpm.
3. Diameter of the disc - 216 mm.
4. Whether works with metal - yes.
5. Weight - 9.4 kg.

ZUBR ZPT-255-1800 PL

Inexpensive semi-professional model, suitable not only for work with wood and plastics, but also with thin aluminum. Not only with wood and plastic, but also with thin aluminum..

Makes cuts of different type: straight, oblique, combined and oblique.

Due to its functionality and the power of 1.8 kW, this saw is often purchased for the home, small workshop or on-site visits.

Its size and weight make it easy to carry or transport in the trunk of your car. Flexible settings and ease of use make this model popular among beginners and professionals alike.

The laser marker and bright backlighting ensure a precise cut.

The blade rotates at 5,000 rpm, can be tilted 45 degrees, and rotated 47 degrees..

It is possible to connect a vacuum cleaner for cleaning the working surface from sawdust and crumbs formed by materials.

Main features:

1. Power of the saw - 1.8 kW.
2. Speed of a disk - 5000 rpm.
3. Diameter of the disk - 255 mm.
4. Whether works with metal - yes.
5. Weight - 13 kg.

ZUBR ZPT-210-1600 PL

Compact and lightweight mitre saw, which can be attached to the desk. Connects to 220 W., the cord length of two meters is quite convenient to work without the constraints of movement.

Such a device is suitable for working with workpieces made of wood, plastic, non-ferrous metals, often purchased by masters of installation of interior and entrance doors.

The disc diameter of 21 cm rotates at a speed of 5 thousand revolutions per minute, the motor power is 1.6 kW.

If the load on the motor becomes too high or if the saw blade encounters material of unsuitable hardness, the motor brake is activated, saving the tool from breakage.

There is a laser marker for precise marking and a dust collector, the saw is connected to an industrial vacuum cleaner so that the working surface is clean and nothing interferes with the operator's control of the machine.

Key features:

1. Power of the saw - 1,6 kW.
2. Speed of the disk - 5000 rpm.
3. Diameter of the disc - 210 mm.
4. Whether works with metal - yes.
5. Weight - 10 kg.

Wortex MS 2116 LM.

Another representative of compact crosscut saws, which has a good 1.6 kW.

The motor rotates the saw blade at a speed of 5,000 rpm, does not overheat and is stable throughout the work, even if you have to work off a large amount of material.

This saw can easily handle hardwood, plastics, non-ferrous metals and laminate.

Cutting accuracy is ensured by the laser marker, the saw can be connected to a vacuum cleaner, for this purpose there is a special adapter and a capacious dust bag.

Due to its low weight, the device is easy to carry in the trunk if you need to take it to the construction site.

Tilt angle and turn angle is 45 degrees, the tool is controlled by a large handle ergonomically shaped.

Main features:

1. Saw power is 1.6 kW.
2. Speed of a disk - 5000 rpm.
3. Diameter of the disc - 210 mm.
4. Whether it works with metal - yes.
5. Weight - 11.5 kg.

Top 4 best professional mitre saws

Makita LH1040.

For professional work with various materials in a large volume, this model Japanese-made is better suited than many.

With good equipment, reliable housing assembly and a long service life, the saw will be a good helper in the workshop or in construction.

The motor power is almost 1.7 kW and the blade rotates at 4.8 thousand rpm. Throughout the body, the manufacturer has placed vents that prevent overheating.

The engine starts smoothly, gradually building up power. There is a function of smooth braking of the motor if the unit is faced with a heavy load, which can lead to failure.

There is a bright backlight, a vacuum cleaner connection is available. Changing the disk is very simple and does not take much time, the kit has a special key.

Users praise the model for a good factory calibration, thanks to which you can start working immediately after purchase.

Main characteristics:

1. Power of the saw - 1.65 kW.
2. The speed of the disc - 4800 rpm.
3. Diameter of the disc - 260 mm.
4. Does it work with metal - yes.
5. Weight - 13.7 kg.

Makita LH1201FL

A crosscut saw for professional use that easily handles non-ferrous metals, wood, plastics and tiles.

With the laser marker installed and a disc speed of 3800 rpm, it achieves a smooth and precise cut.

Powered by the mains, the cord is 2 meters long, the motor power is 1.65 kW.

The saw is made of quality materials and is small in size, so it easily fits in almost any trunk. But its weight is significant, which is why it is most often used with a table mount.

LED backlight with good brightness values is present, the motor starts smoothly and runs steadily, without jerking.

There is also a motor brake function, you can connect an industrial vacuum cleaner to remove sawdust.

Main features:

1. Power of the saw is 1650 W.
2. Speed of a disk - 3800 rpm.
3. Diameter of the disc - 305 mm.
4. Does it work with metal - yes.
5. Weight - 20.7 kg.

BOSCH GCM 8 SDE

Small in size crosscut saw, which is often used by professionals and amateurs.

Inside there is a motor with power of 1600 watts, the disc rotation speed of 216 mm is 5 thousand rpm.

Of the main features of the model - soft start motor and infinitely adjustable speed, which allows you to adjust the unit to each type of work material.

The saw has good factory calibration and is easy to maintain and operate. If necessary, repair parts can be found on the manufacturer's website.

Comfortable rubber handle provides a firm grip, and there are additional supports that fix the saw to the table.

Tilt angle is 60 degrees, and the machine turns 47 degrees.

Key Features:

1. Power of the saw is 1.6 kW.
2. Speed of the disk - 5000 rpm.
3. Diameter of the disc - 216 mm.
4. Does it work with metal - yes.
5. Weight - 18.5 kg.

Metabo KGS 315 Plus

Reliable and powerful professional mitre saw that has a motor 2.2 kW power to spin the saw blade at up to 4,100 rpm.

This is less than what we're used to, resulting in a lower noise level when working.

There is also infinitely variable speed control to ensure maximum efficiency when working with different materials: wood, thick plastic and metal.

Molded aluminum body and soleplate, with additional supports to keep the tool firmly attached to the table.

The saw is equipped with a laser marker, bright LED lighting and a large dust collector.

This set of features allows you to make the most accurate cut or cut, without distraction to mark or clean the working surface.

And if the saw blade gets stuck in the workpiece, the motor stops, protecting the tool from unnecessary load and possible breakage.

Main features:

1. Saw power is 2.2 kW.
2. Speed of disk - 4100 rpm.
3. Diameter of the disc - 315 mm.
4. Whether works with metal - yes.
5. Weight - 26 kg.

Top 4 best cordless mitre saws

RYOBI EMS190DCL

Lightweight and compact crosscut saw from a reliable manufacturer that runs on battery voltage of 18 V.

This model is often used as an assistant to a more powerful device or on the road, where there is no opportunity to connect to the network.

Of course, for a long time one battery is not enough and you will need to buy a couple of spare. As well as the main one, since it is not included in the package.

The disc diameter is small, only 19 cm, it rotates at a speed of 4.5 thousand revolutions per minute.

It is possible to connect a vacuum cleaner to the saw, it is equipped with a capacious dust canister, there is also a laser marker, thanks to which you can easily achieve a precise and smooth cut at the desired angle.

The machine has a comfortable handle that locks securely in the palm of your hand and makes it easy to operate the tool.

Main characteristics:

1. Battery voltage - 18 V.
2. The speed of the disc - 4500 rpm.
3. The diameter of the disk - 190 mm.
4. Whether it works with metal - no.
5. Weight - 7430 grams.

Metabo KGS 18 LTX 216 0

A good cordless crosscut saw with excellent performance and good functionality.

With a battery voltage of 18 V, this is enough to rotate the blade at 216 mm at up to 4,200 rpm.

The model is equipped with a laser marker and a bright backlight, making it convenient and easy to work with the machine.

It comes with a large dust bag, so you can connect a vacuum cleaner to remove sawdust. By the way, the battery and charger are not included.

The manufacturer has taken care of a good cooling system so that the housing does not heat up during long work.

There is also a motor brake, if the load is too high and can lead to a breakdown.

Compact size and light weight allows you to take the saw with you, especially if you can not connect to the network.

Main features:

1. Battery voltage 18 V.
2. Speed of a disk - 4200 rpm.
3. Diameter of the disc - 216 mm.
4. Whether works with metal - yes.
5. Weight - 13.6 kg.

Einhell TE-MS 18/210 Li-0

Cordless mitre saw with a blade diameter of 210 mm, runs on a battery 18 V.

The charger and battery are not included, but it does include a blade and a dust bag.

The vacuum cleaner is connected to the saw, and the blade rotates at 3,000 rpm, making the cut as precise and smooth as possible.

The engine has a soft start, the motor runs smoothly and steadily, without jerking. Additionally installed backlight and laser marker, which is easily distinguished even in bright light.

Such a device easily copes with hard plastic, different types of wood, laminate, baseboards, etc..

Due to its compact size and low weight, the saw fits in any trunk and can be easily moved from place to place. Angle of inclination is 45 degrees, and the turning angle is 47 degrees.

Main features:

1. Battery voltage is 18V.
2. Disc speed - 3000 rpm.
3. The diameter of the disk is 210 mm.
4. Whether works with metal - no.
5. Weight - 9.8 kg.

Makita DLS600Z

A lightweight (only 6.6 kg) and compact crosscut saw that's perfect for the outdoors and as a supplement to a more powerful device..

Battery operated with 18 V (not included). 165 mm saw blade rotates at 5,000 rpm.

The model is equipped with a capacious dust bag, it is possible to connect a vacuum cleaner.

To ensure that the cuts are perfectly straight, the manufacturer has taken care of installing a bright LED backlight and a laser marker that does not fade under strong lights..

The engine starts smoothly, gradually gaining the desired speed, there are ventilation holes along the body to cool all the elements that get hot during operation.

If the saw encounters an excessive load, the motor stops to avoid breakdown.

With the special wrench included, it is very easy to replace the disk.

Main characteristics:

1. Battery voltage - 18 V.
2. Speed of a disk - 5000 rpm.
3. Diameter of the disc - 165 mm.
4. Whether works with metal - no.
5. Weight - 6.6 kg.

What company to choose?

Our rating includes models of crosscut saws from the most popular manufacturers, such as:

• ZUBR - Budget tools that can be used by both beginners and professionals, equipped with powerful motors that are not afraid of heavy loads;
• Metabo - A brand that produces professional tools. Quality assembly, powerful motor, sharp and strong discs are the distinctive features of the models.
• Makita - medium-powered crosscut saws with quality discs and comfortable tables;
• Bosch - is a German manufacturer that has been at the forefront of the market for many years, producing premium quality tools with a high level of safety for the operator.

What is the difference between an amateur mitre saw and a professional one?

Trim saws can be either professional or amateur.

The latter are not designed for heavy loads, are cheaper in price and are equipped with a motor, the power of which rarely exceeds 1300 watts.

But the professional tools have a capacity of 1.6 kW, large saw blades and thoughtful design that is not afraid of heavy loads and can operate for a long time without interruption..

Customer reviews

Helpful Video

From the video you will get an overview of the best crosscut saw: