Top 14 best wood planers: 2021-2022 rating for quality and reliability

Today's ranking of the best wood planers on our portal itech.techinfus.com/en/ is the best way to quickly find the right model.

For quick navigation, we have divided the ranking into categories:

• Best wood planers by price/performance ratio for 2021-2022;
• The best planer and jointer woodworking machines;
• Best wood planers with belt drive;
• The best wood planers without column;
• The best wood planers with two knives.

To give wooden workpieces the desired thickness and smooth surface use a wood planer.

We will tell you what to pay attention to when choosing such equipment, as well as study the rating of the best for 2021-2022 models, with their technical features, advantages and disadvantages.

Ranking of wood planers for 2021-2022

Place	Name	Price	Rating
Best wood planers by price/performance ratio for 2021-2022
1	Makita 2012NB 1.65 kW	Ask the price	9.8
2	ZUBR RS-305 2 kW	Ask the price	9.6
3	PATRIOT TP 330 2 kW	Learn the price	9.3
The best planer and planer woodworking machines
1	ZUBR SRF-254-1600S 1.6 kW	Check out the price	9.7
2	Einhell TC-SP 204 1.5 kW	To learn the price	9.5
3	BELMASH J150/1170SA 1.1 kW	Learn the price	9.3
Best wood planers with belt drive
1	Enkor Korvet 22-330 1.5 kW	Check out the price	9.4
2	ZUBR SR-330-1800 1.8 kW	Learn more about the price	9.2
3	Enkor Corvet 21 1.5 kW	Learn the price	9.1
Best wood planers without frame
1	ZUBR RS-320 1.5 kW	Learn the price	9.8
2	JET JWP-12 1.8 kW	Learn more about the price	9.7
3	DeWALT DW733 1.8 kW	Learn the price	9.5
Best wood planers with two knives
1	RedVerg RD-WP330 2 kW	Check out the price	9.8
2	BELMASH P1800 1.8 kW	Check price	9.6

How to choose a wood planer?

The main criteria for choosing a wood planer in 2021-2022 are:

• Power .. Motors with power consumption up to 1.6 kW are able to work only in sparing mode, with a small volume of workpieces, and need periodic rest. Models with motors with power consumption from 1.6 kW are suitable for substantial loads. If you plan to work with a wide board, it is better to choose a machine with power indicators of 2.2 kW.
• Permissible dimensions of the workpiece. Here you should start from the size of the lumber available to you.
• Planing depth. The depth of planing in thicknessers is considered to be 2-3 mm. The depth recommended by the manufacturer is 1-1,5 mm, which will allow high-quality work with both hardwoods and wet material.
• Table dimensions. To work with one-meter-long workpieces the length of the working surface of 500 mm is enough. If you often work with boards up to one and a half meters long, a good option would be a machine with a table length of 771 mm.
• Weight. This indicator will determine the possibility of installation, movement and transportation of the thicknessing machine. With a weight of up to 30 kg, the device can be used on a stable table and safely move it when necessary. Models from 40 to 50 kg are also quite mobile, but it is better to install them on mobile or stationary stands. Machines with a weight of more than 60 kg are intended exclusively for stationary installation.
• Design features. Machines with steel frames and cast bases are considered the most durable. The presence of a planing table will align the geometry of the workpiece, compression springs - to reduce the amplitude of the backlash of moving elements. Thermal protection monitors the condition of the motor and protects it from overheating. Magnetic starter will help to prevent the machine from turning on after the appearance of voltage in the network.

The best wood planers by price/quality ratio for 2021-2022

1. the Makita 2012NB 1.65 kW

	Expert's evaluation: ? 9.8 / 10
	Owner's Review.
	Well assembled. Good factory settings. Tables were level (now the back table is removed, workpieces are taken on the rails). Not very noisy in operation. Light and compact, easy to rearrange. Precise scale for setting the thickness of the part. Planes cleanly enough, but the step at the end of the workpiece is small, easily removed by sanding.

One of the most popular models of the thicknesser, which is found in almost all ratings. A good representative of the good price-performance ratio, it has a table for working with workpieces up to one and a half meters long.

The model has a strong frame housing, all possible displacements are leveled due to the presence of compression springs and special steel balls, located in the base of the screws.

The motor is protected by double insulation, no need to connect the machine to the ground loop. The automatic feed system is equipped with light rubber coated rollers, no marks are left on the workpiece when slipping.

The unit can be used immediately after purchase because the factory setting is highly accurate. When changing knives, it is not knocked down, as well as during the transportation of the machine. A great option for a small workshop.

Main features:

• Table length/width, mm - 771/304.
• The maximum width/depth of the workpiece, mm - 304/3.
• Feed speed, m/min - 8,5.
• Power consumption, kW - 1,65.
• Number of knives, pcs - 2.
• Frequency of shaft rotation, rpm - 8500.
• Machine weight, kg - 28,1.

2. ZUBR RS-305 2 kW

	Expert's estimate: ? 9.6 / 10
	Owner's Review
	I was looking for a planer for personal purposes: the construction of a gazebo at the cottage and various household works, whether there is little else you need. I chose the RS-305 Zubr and, in principle, have not regretted the purchase. The machine is not bulky, accurate, fast and easy to work, and the boards are good. To tell you the truth, I had to replace a couple of plastic parts after a while, but I can't say it was a problem.

Powerful planer, which is a part of the professional line of the popular manufacturer.

Refers to compact portable equipment with the ability to process workpieces up to 305 mm wide, the feed speed of the workpieces is 6 meters per minute. It is equipped with a powerful motor with overheat protection and two high-speed blades. Table extensions with rollers, support the material in and out, reducing the percentage of rejects.

Rollers are also available on top of the machine, making it much easier to return the workpiece for re-splitting if the first cut didn't produce the desired result. The model has a rigid design and there is no drift or vibration during operation. Thanks to the smooth surface of the table, there is less friction when feeding the workpiece. Also the body is equipped with convenient carrying handles, the weight of the device is 27.5 kg.

The main characteristics:

• Table length/width, mm - 307/290.
• The maximum width/depth of the workpiece, mm - 305/3.
• Feed speed, m/min - 6.
• Power consumption, kW - 2.
• Number of knives, pcs - 2.
• Shaft speed, rpm - 8000.
• Weight of the machine, kg - 27,5.

3. PATRIOT TP 330 2 kW

	Expert's evaluation: ? 9.3 / 10
	Owner's review
	My choice was between Jet and Zubr. Choice fell on the Zubr. After the purchase I looked and looked inside and was satisfied: the construction is excellent, I just greased it up a bit. Of course, it was heavy for transportation, but it stood like a monolith. The tables were adjusted correctly. When planing, the chips are magnetic and clog the outlet, I had to use a stick to drive back and forth while planing, so as not to stagnate chips (at minimum planing).

Simple and easy to use planer with a 2 kW motor, designed for processing wooden workpieces to the desired thickness, with a smooth and even surface.

The design is equipped with special holes, thanks to which the device can be secured to the support to reduce vibration during start-up and further use. The automatic workpiece feed speed of 6 meters per minute helps to get the job done quickly and is considered a good value for a small workshop.

The model has an emergency stop button located on the body in an accessible location. The motor is overload resistant and there is a school on the front panel to adjust the accuracy of the material. The machine does not require special maintenance and is suitable for long-term use.

Main features:

• The maximum width/depth of the workpiece, mm - 330/3.
• Feed speed, m/min - 6.
• Power consumption, kW - 2.
• Number of knives, pcs - 2.
• Frequency of shaft rotation, rpm - 8000.
• Machine weight, kg - 26 kg.

The best planer and planer woodworking machines

1. ZUBR SRF-254-1600S 1.6 kW

	Expert's evaluation: ? 9.7 / 10
	Owner's Review
	The machine took for the garage workshop, with the understanding that he combined, and, of course, it will not give super quality, as the machines above the class for a particular task (not combined). Nevertheless, I have no complaints. Assembly is okay, the quality of planing/re-sawing is good for my purposes - I do not work with valuable species, but I think that the quality of work with them will not be perfect, but not bad.

Combined planer/planer machine that combines the functions of a planer and planer. Suitable for use in the workshop and processing workpieces up to 254 mm wide.

The engine due to the belt drive during operation is not very noisy, there is protection against overload. After a temporary power outage, there is no restart due to the installed magnetic starter. There is an automatic workpiece feed with a speed of up to 6 meters per minute, the guiding angle is adjustable between 0-45 degrees.

The machine has two knives from high-speed steel, which are able to process both soft and hard woods. Note the high rotation speed of the knife shaft, which will ensure a smooth and even surface. Working tables are polished and cast, so the friction of the workpiece is reduced and makes it easier to feed them. The dust collector spigot is easy to set to the user's desired position, which helps to achieve a clean workplace and remove chips from the machined material.

Key Features:

• Table length/width, mm - 303/270.
• The maximum width/depth of the workpiece, mm - 254/3.
• Feed speed, m/min - 6.
• Power consumption, kW - 1,6.
• Number of knives, pcs - 2.
• Shaft speed, rpm - 9000.
• Weight of the machine, kg - 33,5.

2. Einhell TC-SP 204 1.5 kW

	Expert's evaluation: ? 9.5 / 10
	Owner's Review
	I took it for a home workshop, so to speak, to try it out, to see if it is my thing or not. I had to adjust the height of the tables relative to each other. I had to adjust the blades right away after installation. After the first boards made of pine, there were chips on the knife, and now the stripes are visible while processing. In general, it is possible to work, but not for super precise work.

Stationary machine with sliding workpiece calipers for quick and maximum precision planing of workpieces in order to get the desired thickness and a smooth even surface. There is a chip removal system, the maximum depth of the workpiece can be 3 mm.

The model has an automatic material feeder with a speed of 6 meters per minute. The motor power is small, 1.5 kW, so this device is not suitable for large amounts of work. However, overload protection is present.

The product is easy to position thanks to the slat table, made of impact-resistant aluminum and has an adjustable tilt stop of up to 45 degrees. The wide base has rubber pads that dampen vibration that occurs when starting. The belt-driven motor has a reduced noise level, although headphones are still recommended for comfortable operation.

Main features:

• Table length/width, mm - 270/210.
• The maximum width/depth of the workpiece, mm - 204/3
• Feed speed, m/min - 6.
• Power consumption, kW - 1,5.
• Number of knives, pcs - 2.
• Rotation frequency of the shaft, rpm - 9000.
• Machine weight, kg - 24 kg.

3. BELMASH J150/1170SA 1.1 kW

	Expert's evaluation: ? 9.3 / 10
	Owner's Review
	Started building my own private home and realized I could use a woodworking machine. Studying the market and reviews of machines, I settled on this model. It proved to be quite good in the work - a powerful motor, a lot of features, and especially pleased that the machine is easily reconfigured if such a need arises. Nevertheless I noticed one disadvantage - the saw blade was not installed exactly straight (maybe I was just "lucky"). It is not always convenient to work without the marking - it is absent.

Fugoval machine from the Belarusian manufacturer for stationary placement, equipped with a motor power of 1.1 kW. Suitable for processing workpieces made of wood in order to give them the desired size and shape. With this machine the user can perform the following operations: planing along the plane and edges, planing at the desired angle (along the edge), quartering.

All the main units of the machine are made by the manufacturer in cast iron; receiving and falling table, parallel stop. It is possible to connect the exhaust unit for waste removal through the aspiration pipe. The knife shaft, which operates at a frequency of 4800 revolutions per minute, has a cast guard. The unit is placed on a prefabricated frame, and the knife shaft can be replaced with Helical or Spiral shafts.

Key features:

• The maximum width/depth of the workpiece, mm - 152/3.
• The frame - portable.
• Power consumption, kW - 1,1
• Number of knives, pcs - 3.
• Frequency of rotation of a shaft, rpm - 4800.
• Machine weight - 93 kg.

Best wood truing machines with belt drive

1. the Enkor Corvette 22-330 1.5 kW

	Expert's evaluation: ? 9.4 / 10
	Owner's review
	In general, Rismus "Korvet" machine is even very good, but again, it depends on what to compare with. On the merits of this machine can be noted width of the workpiece - 330 mm and track the emission of sawdust in a directly connected bag. But there the pluses, alas, end - after a couple of weeks, the stopper fell apart, the knives were disposable, and their replacement is quite difficult.

Reissmusovy machine to work with wood pieces up to 320 cm wide, which is equipped with an electromagnetic starter, protecting against restart after power outage.

For safe operation is responsible anti-kickback, the engine is protected from overheating, and the depth limiter with a handy indicator will not allow overloading and further damage. There is a connection for a vacuum cleaner in the form of a spigot to remove waste.

If necessary, the workpiece is returned to the receiving table thanks to the top rollers, the automatic feed speed is 7 meters per minute and is performed by two rubberized rollers, whose coating does not leave marks on the board. The knives are sharp, double-edged, which cope well with both hard and soft species and are easy to replace.

Main features:

• Table length/width, mm - 330/235
• The maximum width/depth of the workpiece, mm - 330/2,4.
• Feed speed, m/min - 7.
• Power consumption, kW - 1,5 kW.
• Number of knives, pcs - 2.
• Frequency of shaft rotation, rpm - 8500.
• Machine weight, kg - 33 kg.

2. ZUBR SR-330-1800 1.8 kW

	Rating of the expert: ? 9.2 / 10
	Owner's review
	In a year and a bit 12 cubic meters of wood. Started to get cheeky - knocked out the impeller and as a consequence damaged the winding. Rewound for 2000 with the impeller. For me, acceptable. From the disadvantages - weak blades. Especially the native ones. From not very good quality alloy, even magnetized bad. I don't recommend to grind OEM blades, they will shrink fast. New 2500 ones are enough for 10 cubes. If you treat the model carefully, you won't have a lot of problems with it.

Compact size planer with simple operation and sturdy build. The model belongs to the portable, is well suited for small and medium-sized work, will take both hard wood and wet.

There is an electronic indicator, which together with the millimeter scale helps control the accuracy of the processing depth and height of the thicknesser table. To adjust the depth as well as securely hold the workpiece, the manufacturer has equipped the machine with a rotating handle.

An additional advantage of this model is the convenient auto-feed mode switch. The user can choose a speed of 4 or 6 meters per minute. Possibility to connect the dust bag to the machine. Also it is possible to install the table extension of 355 mm by 195 mm (length/width).

Main features:

• Table length/width, mm - 330/285.
• The maximum width/depth of the workpiece, mm - 330/3.
• Feed speed, m/min - up to 6.
• Power consumption, kW - 1,8.
• Number of knives, pcs - 2.
• Frequency of shaft rotation, rpm - 9000.
• Machine weight, kg - 40.

3. Enkor Corvette 21 1.5 kW

	Expert's evaluation: ? 9.1 / 10
	Owner's Review.
	Overall, to summarize the impressions - they are excellent, despite the shortcomings. Of course it's a fairly simple benchtop machine, but that's not what you'd expect for the money. If you are not too picky, and look carefully at the condition of the mechanisms, it will work for a long time and without breakage. I can now say with certainty that the main failures were from "lack of care".

Another machine from this manufacturer, equipped with a reliable motor with thermal relay and belt drive, protecting the device from overheating and breakage.

Engine power is 1.5 kW, this is not a professional model. It copes well with small amounts of work, designed for processing wood workpieces in size by thickness. For protection against accidental activation, the device is equipped with a special key.

The machine has a depth limiter, the maximum it can reach 2.5 mm. The feed of the workpieces is automatic, its speed is 6 meters per minute. The front and rear tilting table extensions, equipped with additional rollers, are available for convenience and the ability to work with different workpiece lengths. The same rollers are mounted on top to simplify the process of returning the board to the planing zone.

Key features:

• Table length/width, mm - 318/295.
• The maximum width/depth of the workpiece, mm - 318/2,5.
• Feed speed, m/min - 6.
• Power consumption, kW - 1,5.
• Number of knives, pcs - 2.
• Frequency of shaft rotation, rpm - 8000.
• Machine weight, kg - 39 kg.

The best wood planers without a frame

1. ZUBR RS-320 1.5 kW

	Evaluation of the expert: ? 9.8 / 10
	Owner's Review
	I chose the price/quality ratio machine for personal use, and Zubr RS-320 has pleased me in this respect. It has a sturdy and reliable construction, the main parts are made of good quality metal. In work the machine is also good - it cuts relatively quickly, and the boards themselves turn out even. It is such a workhorse, maybe not the fastest, but sturdy - for a home workshop it is just right. I recommend it!

Model, which refers to portable machines for working with hard and soft wood, to give them the desired size and shape, as well as a smooth and even surface. The maximum width of the workpiece can be up to 318 mm and the planing depth is limited to 2.5 mm.

Board feeding is automatic, the speed is estimated at 8 meters per minute, which is considered a good result for a model with a 1.5 W motor. The motor is protected against overload and can run for a long time without necessarily shutting down.

The model is equipped with comfortable carrying handles, a rigid, stable design, and rubber spacers to reduce vibration at startup. Two sharp, high-speed steel knives are used for woodworking. The table has extensions with rollers that support the workpiece in and out, and the same upper rollers return it to the table for a second machining cycle. Note that the table has a perfectly smooth table surface so that the workpiece slides across it with minimal friction.

Main features:

• Table length/width, mm - 320/285.
• The maximum width/depth of the workpiece, mm - 318/2,5.
• Feed speed, m/min - 8.
• Power consumption, kW - 1,5.
• Number of knives, pcs - 2.
• Frequency of shaft rotation, rpm - 9000.
• Machine weight, kg - 32.

2. JET JWP-12 1.8 kW

	Expert's evaluation: ? 9.7 / 10
	Owner's review
	On the whole, Jet JWP-12 is a pretty good machine. He is relatively small, but it is fast and, so to speak, enduring - not afraid of prolonged work. Assembly is excellent, strong and reliable. However, there are some disadvantages. The main one is the native knives. The first knot and they got chipped. Also, I had to increase the length of the tables myself, especially at the output. As a result, I can recommend it, but be prepared for the fact that the machine to work will have to upgrade a little.

A popular portable machine for small jobs. Has a good ratio of lightweight motor collector-type power, high speed shaft for planing and a good rate of automatic feed blanks. The model has a well thought-out chip evacuation system, the hinged tables are of high quality and equipped with longitudinal rollers.

The machine is also equipped with a good safety system, consisting of a "claw" protection, capable of catching the workpiece on blowback, and a thermal relay unit that does not allow the motor to overheat, but has a forced-action button.

The machine is suitable for work that requires high precision, but the slots of the machine have to be regularly cleaned of chips, making it unsuitable for professional use.

Main features:

• Table length/width, mm - 295/318.
• The maximum width/depth of the workpiece, mm - 318/2,5.
• Feed speed, m/min - 7.
• Power consumption, kW - 1,8.
• Number of knives, pcs - 2.
• Frequency of shaft rotation, rpm - 9000.
• Machine weight, kg - 27.

3. DeWALT DW733 1.8 kW

	Expert's evaluation: ? 9.5 / 10
	Owner's Review.
	It is certainly a reliable and durable ruler, which cannot be compared to any of the cheaper Chinese ones. The only thing is that the plastic slider, which acts as a flat lens that enlarges and stretches the graduations on the ruler, is located at some distance from the scale. Therefore, the measurement depends on the size of the angle from which you look at this pointer. Naturally, accuracy is out of the question here.

The model, which was developed by the company for sale on the foreign market, is intended for professional use.

Equipped with two high-speed knives and has a power of 1.8 kW, the planing unit has a rigid locking, which eliminates any movement at work, even if the surface of the workpiece is uneven. The calibration of the lumber becomes accessible thanks to the convenient settings and the special planing depth limiter.

When the mains voltage increases, the power supply is cut off by the installed automatic circuit breaker. The bed of this model is cast and the frame is reinforced. Additional tables are reliably fixed and allow you to work with long workpieces without rejects, and their feed speed is 8 meters per minute.

Despite the shaft speed of 10000 revolutions per minute, the motor well withstands a heavy load and has protection against overheating.

Main features:

• Table length/width, mm - 520/319.
• The maximum width/depth of the workpiece, mm - 317/2.
• Feed speed, m/min - 8.
• Power consumption, kW - 1,8.
• Number of knives, pcs - 2.
• Frequency of shaft rotation, rpm - 10000.
• Machine weight - 33,6 kg.

Best wood planers with two knives

RedVerg RD-WP330 2 kW

	Expert's evaluation: ? 9.8 / 10
	Owner's Review
	If we talk about the pluses, I can note that the thicknesser has a good assembly, it is relatively not strongly vibrates and works more quietly than other analogues, while still not warm. Also, the machine has a handle which is very comfortable in the hand and a good case. However, the machine is heavy. I also did not like the nozzles - quickly blunt, but other models in this price range are even worse.

Compact thicknesser with two sharp knives and a powerful motor for high speed, and therefore the efficiency of work.

Blades of blades are made of quality alloy HSS. The working depth is user adjustable by raising or lowering the planing arm. The installed stops that support the board on the input and output allow you to work with boards up to 330 mm wide.

The advantages of this model include its compact size and low weight, which makes it easy to carry and transport the machine. It also has a simple control system, and the machine is ready to work immediately after it is taken out of the box, because the model has good factory calibration.

Well, the drive with a large traction force will achieve uniformity of processing and get a perfectly smooth and even surface at the output.

The main characteristics:

• The maximum width/depth of the workpiece, mm - 330/3.
• Feed speed, m/min - 6.
• Power consumption, kW - 2 kW.
• Number of knives, pcs - 2.
• Frequency of shaft rotation, rpm - 8000.
• Machine weight, kg - 26.

2. BELMASH P1800 1.8 kW

	Evaluation of the expert: ? 9.6 / 10
	Owner's Review
	I bought a good helper for my dacha - the Belmash P1500 planer. I consider the acquisition very successful and necessary. As at the sawmill the logs are sawn up into boards on the band saw and the board turns out to be of different thickness and width. Wood machine for a day, I alone processed 3 cubic inches of board. Processing was done on both sides. Of the resulting board later I made a lining, which covered the ceiling in a house under construction.

Improved version of the RAS P1500, which differs by increased engine power and the possibility of connecting a special chip ejector.

It uses a single-phase collector electric motor, which has double insulation. There is a current fuse, which will shut down the machine in case of overload. The mains switch has a convenient locking cover. A knob is used to adjust the planing depth, and the result is visible on the millimeter scale.

There are two knives with double-sided sharpening, if one side gets blunt, the blade turns over and you can continue working. Spring-loaded rollers with rubber coating that do not leave marks on the wood are used to feed the blanks. There are metal side guards with handy handles for transporting the machine. The model's support is cast, with four holes for reliable fixation on the table or workbench.

Main features:

• Table length/width, mm - 330/240.
• The maximum width/depth of the workpiece, mm - 330/2,4.
• Feed speed, m/min - 7.
• Power consumption, kW - 1,8.
• Number of knives, pcs - 2.
• Frequency of shaft rotation, rpm - 8500.
• Machine weight, kg - 33.

What company to choose?

When buying a planer, experts recommend giving preference to popular manufacturers of tools and workshop equipment.

These brands have proven their reliability, and are also able to offer the buyer a quality service for further maintenance of the devices:

• Makita;
• ZUBR;
• PATRIOT;
• BELMASH;
• DeWALT.

Useful video

How to choose a planer for your home workshop: