Top 15 best faecal pumps: rating 2021-2022 and which one to choose for pumping sewage

1Own fecal pump on dacha plots will not be superfluous, since most of them do not have a centralized sewage disposal.

Many settlements also do not have sewage outlets, and all the sewage and flood waters go either into pits and septic tanks, or into outdoor toilets, which need to be cleaned somehow.

This is where such a unit comes in handy.

To help you in your choice, we have compiled for you the rating of the best faecal pumps from different manufacturers in the price/performance ratio.

When selecting models, we took into account the ratio of cost, quality, performance, as well as the opinion of experts and users, statistics of Rosstat. Here you will find only the best faecal pumps.

Rating TOP 15 best faecal pumps of 2021-2022

Place Name Price
Top 5 best faecal pumps for sewage pumping by price/quality for 2021-2022
1 JILEX Faecal 330/12 (1200W) Learn the price
2 JILEX Fekalnik 260/10 H (800 W) Learn the price
3 VICHR FN-2200L (2200 W) Learn the price
4 VICHR FN-250 (250 W) Learn the price
5 BELAMOS DWP 1300CS Find out the price
Top 5 best inexpensive faecal pumps
1 JILEX Fekalnik 230/8 (590 W) Learn the price
2 KALIBR NPTS-1400U (Aqua Line) (1400 W) Learn more.
3 DZHILEKS Tugunok 140/6 (250 W) Learn more.
4 DZHILEKS Fecalnik 200/7 H (450 W) Learn the price
5 JEMIX GS 400 (400W) Check price
Top 5 best heavy duty sump pumps
1 Pedrollo BCm 15/50 (MCm 15/50) (1100 W) Learn the price
2 VICHR FN-1100L (1100 W) Learn the price
3 VICHR PH-1500L (1500 W) Learn the price
4 UNIPUMP FEKACUT V1300DF (1300 W) Learn the price
5 KALIBR NPZ-1100U Aqua Line (1100 W) Learn the price

How to choose a faecal pump for pumping sewage?

In order not to make a mistake with the purchase and not to take too powerful, too weak or not suitable for the operating conditions of the pump, it is necessary first of all to understand what such units are needed for.

Faecal pumps are used to clean drainage drains, septic tanks, cesspools, removal of floodwater from basements and cellars, emptying wells.

They are equipped with filters that pass particles of certain diameters.

When choosing a model, you should pay attention to the following parameters:

  • mounting type - submersible are lowered directly into the septic tank or pit, surface ones are installed near storage reservoirs and serve to transport the masses from a depth of no more than 7-9 m;
  • pump type - Drainage models are designed for contaminated water with small particles, while fecal models can pump viscous media with large particles. Faecal models are often equipped with cutting elements;
  • case material - Most models come with plastic housings, they are easy to maintain, lightweight and reliable, but there are also models with cast iron or steel bodies. Metal bodies can react with some components of bioreagents, so such models should be used with caution;
  • immersion depth - depends on the depth of the pit or septic, the parameters must match each other;
  • the presence of a macerator - is optimal for using the pump in outdoor toilets, cesspools and pits with solid components.

2

Top 5 best faecal pumps for sewage pumping by price/quality for 2021-2022

JILEX Fecal 330/12 (1200 W)

The submersible model is one of the most practical choices for dacha. The pump is suitable for 2Pumping drainage and rainwater with organic solids up to 37 mm in diameter.

Equipped with a float switch for automatic operation and energy saving..

At heavy loads and high temperatures the thermostat is automatically triggered. Excess system air is evacuated by means of a special valve.

Besides standard applications, the pump can also be used for draining swimming pools, wells, reservoirs, drains and cellars.

Due to the peculiarities of its design, the model has requirements for the temperature of the liquid - not more than 35 degrees.

Technical specifications:

  • Type: submersible;
  • Immersion depth: 8 m;
  • Flow capacity: 19.8 cubic meters per hour;
  • Body: plastic;
  • Installation: vertical.

Advantages

  • low power consumption;
  • low noise level;
  • No-load and overheating protection;
  • capacity and throughput.

Minuses

  • Incorrect size of connection hoses in the documentation.

JILEX Fecal Pump 260/10 H (800 W)

Reliable and robust pump with stainless steel casing provides a good 2Flow capacity and head..

The float system reliably prevents idling and guarantees full automation of the pump.

The motor is equipped with a cooling system to protect against overheating and - if the temperature is significantly higher - a thermal relay is triggered.

Several types of hoses can be connected depending on the pumped liquid.

Manages wells and water reservoirs well, allows you to create pressure in the system to irrigate gardens or orchards. Appreciated by users for reliability and universality of use.

Specifications:

  • Type: submersible;
  • Immersion depth: 8 m;
  • Flow capacity: 15.6 cubic meters / hour;
  • Body: stainless steel;
  • Installation: vertical.

Pros of

  • automatic operation;
  • no-load protection;
  • motor protection;
  • universality.

Cons

  • not equipped with a shredder.

VICHR FN-2200L (2200 W).

One of the most powerful faecal pumps in the company's line. Due to the presence of 2design of shredders can be used for pumping liquids with a high degree of contamination.

Can also be used for draining basements and cellars, basements, wells and swimming pools..

Can be placed on a special platform or suspended from a rope Protected against idle and overheating.

Works "out of the box" - no need to fill and set up.

An important point is that the device should not come into contact with chemicals, therefore it is not suitable for cesspools previously cleaned with septic tanks.

Technical characteristics:

  • Type: submersible;
  • Immersion depth: 8 m;
  • Capacity: 30 cubic meters per hour;
  • Casing: stainless steel;
  • Installation: vertical.

Advantages

  • sturdy housing;
  • power;
  • overheat protection;
  • works "out of the box".

Cons

  • not suitable for technical drains.

VICHR PH-250 (250 W).

A simple and economical pump with a good flow capacity.. 2Equipped with an asynchronous motor with overheat protection and a centrifugal pump with a vane wheel and a floating system.

Passes particles up to 27 mm in diameter.

Operates at fluid temperatures not exceeding 35 degrees due to the plastic parts in the design.

Can be used for draining wells, water reservoirs, car washes, creating head in irrigation installations.

Contact with aggressive chemical compounds is undesirable. Does not have a shredding blade and therefore not suitable for cesspools.

Technical Data:

  • Type: submersible;
  • Immersion depth: 9m;
  • Capacity: 9 cubic meters/hour;
  • Housing: stainless steel;
  • Installation: vertical.

Advantages

  • reliability;
  • energy efficiency;
  • performance;
  • ease of use.

Cons

  • can jam.

BELAMOS DWP 1300CS

Excellent pump for removal of liquids from pit latrines with coarse debris of up to 25 mm. 2The cast iron pump housing is resistant to temperature changes and the pump's ruggedness makes it ideal for pumping industrial wastewater, sewage, water with fibrous solids, draining flooded basements and cellars.

The scope of application is not practically limited - the model shows itself well in domestic conditions, and on construction sites, car washes, various reservoirs.

Copes successfully with viscous liquids. Resistant to corrosion, overheating, protected from idling due to the float system.

Technical characteristics:

  • Type: submersible;
  • Immersion depth: 8 m;
  • Flow rate: 18 cubic meters per hour;
  • Body: cast iron;
  • Installation: vertical.

Pros of

  • availability of choppers;
  • the metal body;
  • performance.

Cons:

  • Does not pump out until clean.

Top 5 best inexpensive fecal pumps

JILEX Fekalnik 230/8 (590 W).

Submersible pump for pumping both clean water from tanks and groundwater, 4suction water, sewage water and liquids with particles up to 35 mm in diameter.

Suitable for construction and domestic works, when pumping large volumes of water.

The device does not have the highest pumping capacity, but easily withstands prolonged loads.

The motor is equipped with self-lubricating bearings, prolonging the life of the unit and its operation time.

The float system protects against idling and saves energy.

The plastic casing makes the pump easy to move and transport, but the plastic casing is easy to damage if used carelessly. There is also no shredder.

Specifications:

  • Type: submersible;
  • Immersion depth: 8 m;
  • Capacity: 13.8 cubic meters per hour;
  • Body: plastic;
  • Installation: vertical.

Advantages

  • mobility;
  • performance;
  • self-lubricating bearings;
  • long lifetime.

Cons

  • unreliable case.

KALIBR NPTS-1400U (Aqua Line) (1400 W)

Pump for pumping rain and ground water, drainage ditches, swimming pools, 2wells, drainage pits.

Passes particles up to 40 mm, not equipped with cutting elements. Optimal for domestic tasks, pumping drainage in private or vacation homes.

Practically silent, with good head and performance.

It can be used also in car washes and for pumping pressure in irrigation systems in gardens and vegetable gardens.

However, users note that the pump often clogs even in the presence of water inclusions, allowed by the technical characteristics of the device.

Technical features:

  • Type: submersible;
  • Immersion depth: 7 м;
  • Flow rate: 24.96 cubic meters per hour;
  • Body: plastic;
  • Installation: vertical.

Pros:

  • pressure;
  • low noise level;
  • cost.

Cons:

  • quickly clogged.

JILEX Tugunok 140/6 (250 W)

Small in size and power pump for pumping liquids from pits, septic tanks, 5shallow wells and water tanks.

Not equipped with a blade, passes only particles with a diameter of no more than 32 mm, so not well suited for outdoor toilets

Does not cope well with sludge in septic tanks and thick masses in pits.

Shows good performance as a well pump, for draining basements, cellars, basement floors.

Easy to operate and maintain, repairable by own efforts.

Low noise level and power consumption are further features of the model.

Low weight and dimensions make it possible to quickly redirect and reconfigure the unit if necessary.

Specifications:

  • Type: submersible;
  • Immersion depth: 8 m;
  • Capacity: 8.4 cubic meters per hour;
  • Body: plastic;
  • Installation: vertical.

Advantages

  • economy;
  • low noise level;
  • protection against idle and overheating;
  • corrosion-resistant;
  • long lifetime.

Disadvantages

  • filter clogs quickly;
  • not for draining pits;
  • Poorly pumps out sludge mass from septic tanks.

JILEX Fekalnik 200/7 H (450 W)

Inexpensive submersible pump with stainless steel casing will ensure long-lasting operation 8both in a single session and as a whole.

Has a good performance, it is allowed to sink up to a depth of 8 m, which allows its use both for septic tanks or cesspools without reagents, and for deep reservoirs and wells.

Thanks to the housing it can be placed in water for a long time and can be used to create a head in irrigation systems, in vegetable gardens or orchards to irrigate crops.

It is not equipped with a chopper, so it is difficult to cope with thick masses.

The float mechanism protects against idling and the motor is protected against overheating. Suitable for both domestic and construction use.

Technical specifications:

  • Type: submersible;
  • Immersion depth: 8 m;
  • Flow rate: 12 cubic meters per hour;
  • Body: stainless steel;
  • Installation: vertical.

Advantages

  • low power consumption;
  • stainless steel housing;
  • Protection against idle and overheating;
  • reliability;
  • long lifetime.

Disadvantages

  • Not for septic tanks with bioreagents.

JEMIX GS 400 (400 W)

Small faecal pump for shallow cesspools, pumping liquids out of 8For pumping out liquid from flooded cellars and basements, for drainage of groundwater, floodwaters and for emptying tanks.

Affordability and ease of use are provided by low cost, lightweight plastic housing, float-operated mechanism, protecting against dry running. Designed for a long period of operation.

Despite low capacity and throughput, it excellently performs automated pumping of liquids with impurities and inclusions up to 35 mm in diameter.

Economical in terms of energy consumption

Fully ready to use out of the box and repairable by own efforts as the casing can be opened with common tools.

Technical characteristics:

  • Type: submersible;
  • Immersion depth: 5 м;
  • Flow capacity: 7.5 cubic meters per hour;
  • Body: plastic;
  • Installation: vertical.

Advantages

  • economy;
  • ease of maintenance and repair;
  • cost;
  • long lifetime.

Disadvantages

  • low capacity.

Top 5 best powerful drainage pumps

Pedrollo BCm 15/50 (MCm 15/50) (1100W)

Powerful premium pump delivers some of the highest flow rates 4capacity and head, passes particles up to 50 mm, but may be submerged up to a maximum of 5 meters.

Head power is provided by a double-channel stainless steel impeller.

The motor winding is perfectly insulated by a double seal with intermediate oil chamber.

All parts except the casing are made of stainless steel to ensure long life of the pump.

Control is automatic due to external float switch which gives additional protection against dry running.

Technical Specifications:

  • Type: submersible;
  • Immersion depth: 5 м;
  • Flow rate: 48 cubic meters per hour;
  • Body: cast iron;
  • Installation: vertical.

Pros:

  • sealing;
  • decent performance;
  • corrosion resistant;
  • long service life.

Cons

  • cost.

VICHR FN-1100L (1100 W).

The domestic pump, designed specifically for the conditions of the Russian use, thus possessing high performance. 7The pump has a high productivity..

It is enough to work with cesspools of standard volume. Equipped with a powerful motor with intelligent protection against overheating, and the stainless steel housing guarantees a long service life.

Equipped with a shredding nozzle, which crushes large fractions to the required size.

Protection of the basic elements is provided by the classic float mechanism.

With a relatively low flow capacity gives a good head, can be used for irrigation systems, drainage systems for swimming pools, wells or flooded basements.

Technical Data:

  • Type: submersible;
  • Immersion depth: 9 m;
  • Capacity: 14 cubic meters per hour;
  • Body: stainless steel;
  • Installation: vertical.

Advantages

  • reliability of assembly;
  • efficiency;
  • pressure.

Cons:

  • blades rust quickly.

VICHR FN-1500L (1500W)

Excellent pump for its performance for a reasonable price - high flow rate 7Capability, excellent head, powerful motor, protection against overheating and idling, energy saving.

Equipped with cutting elements, shredding particles to the required size.

Float switch protects against dry running and enables fully automatic operation of the pump.

Rugged stainless steel and cast iron casing will last a long time. However, the model is sensitive to fluid temperatures - no more than 35 degrees - due to the plastic parts.

Technical Specifications:

  • Type: submersible;
  • Immersion depth: 8 meters;
  • Flow rate: 24 cubic meters per hour;
  • Body: stainless steel;
  • Installation: vertical.

Advantages

  • low power consumption;
  • reasonable cost;
  • durability;
  • long service life.

Cons

  • Impeller and blades corrode quickly;
  • inconveniently located side nipple.

UNIPUMP FEKACUT V1300DF (1300 W)

Practically silent, unpretentious pump for draining sewage and waste water without 8large fibrous inclusions.

Permits particles up to 30 mm in diameter. Good for draining septic tanks, water tanks, basements, ground floors.

Powered by a reliable float mechanism, providing both protection against idle operation and full automation of the entire system.

Comes with a rope for hanging and a socket for connecting a hose. The cutting nozzle crushes the inclusions to the required size, preventing the pump from clogging.

Easy to service and install, but not suitable for waters with abrasive particles, metal chips, seawater or combustible mixtures.

Technical specifications:

  • Type: submersible;
  • Immersion depth: 5 м;
  • Capacity: 18 cubic meters per hour;
  • Body: stainless steel;
  • Installation: vertical.

Advantages

  • unpretentiousness;
  • low noise level;
  • protection against idle and overheating;
  • ease of operation.

Cons

  • cost.

KALIBR NPTS-1100U Aqua Line (1100 W)

The efficient centrifugal drainage pump is easy to operate, 8Lightweight and easy to service.

Permits particles up to 40 mm in diameter and is suitable for pumping liquids in septic tanks as well as draining wells and water tanks.

Not suitable for pumping thick masses, which must be taken into account when using the pump to clean pit latrines or clogged septic tanks.

Can be used to drain flooded areas, handles groundwater and melt water well.

Low weight makes it easy to move the pump when needed - plastic housing is robust and damage-proof.

The cable length is an additional plus.

Technical Data:

  • Type: submersible;
  • Immersion depth: 7 м;
  • Capacity: 20 cubic meters per hour;
  • Body: plastic;
  • Installation: vertical.

Advantages

  • economy;
  • efficiency;
  • protection against idle operation;
  • resistant to the effects of bioreagents;
  • long service life.

Disadvantages

  • Not for thick masses.

What company to choose?

On the Russian market pumps are supplied by a considerable number of firms, both domestic and foreign.

Among them we can highlight:

  • Dzylex - Domestic manufacturer, which supplies affordable equipment of acceptable quality. The lineup includes both professional units, and pumps for domestic use. The company produces models with plastic and steel housings, lightweight, leak-proof, with reliable thermal protection and easy maintenance and repair;
  • Herz - German manufacturer, the models of which have high wear resistance and long service life. Their main feature - the ability to work even in extreme conditions. Some models have an increased capacity - up to 260 liters of fluid per minute. The housings are made of cast iron, the parts - steel, so the models have a lot of weight;
  • Vihr - is another Russian manufacturer, which has proven itself on the market. Many models are equipped with choppers, so the units are in high demand. The bodies are made of cast iron and the chopper blades are made of high-strength steel. Models are capable of pumping up to 24 cubic meters of liquid per hour.

Customer Reviews

{{ reviewsOverall }} / 5 Owners Rating (2 votes)
Rating of brand/model
Number of votes
Sort by:

Be the first to leave a review.

User Avatar User Avatar
Verified by
{{{review.rating_title }}}
{{{review.rating_comment | nl2br}}}

Show more
{{ pageNumber+1 }}
Add your review!

Helpful video

From the video you will get an overview of the best fecal pumps:

See also:

Leave a reply

Kitchen

Electronics

Car