Top 16 best pumps for the well: rating 2021-2022 for price / quality and choose a submersible

In many private homes, remote from the central water supply system, water is supplied from wells on the property.

In order for the house to always have clean and fresh water with a sufficient head, many use submersible borehole pumps. But how to choose such a device?

Are there recommendations on the choice, what models should be considered at the beginning of the search?

To answer these questions, we have compiled our own rating of pumps for wells from well-known and proven manufacturers.

When selecting models in the price/quality ratio, technical characteristics, customer reviews and expert opinions were taken into account.

Rating TOP-16 best well pumps for 2021-2022

Place	Name	Price
TOP 4 best downhole pumps by price, quality and reliability for 2021-2022
1	Vodoley BCPE 0,5-50U	Learn the price
2	Vodolei BCPE 0,5-32U (820 W)	Learn the price
3	Aquario ASP 1E-100-75 (1250 W)	Learn the price
4	Grundfos MQ 3-35 (850 W)	Learn the price
Top 3 best inexpensive borehole pumps
1	Vodolei BCPE 0,32-40U	Learn the price
2	UNIPUMP ECO 0 (370 W)	Learn the price
3	Vodolei BCPE 0,5-16U	Learn the price
Top 3 best pumps for a well depth of 40 m
1	Aquario ASP 1E-55-75 (700 W)	Learn the price
2	Aquario ASP 1.5C-60-75 (920 W)	Learn the price
3	VICHR CH-60 (800 W)	Learn the price
Top 3 best pumps for a well depth of 25-30 m
1	JILEX Vodomet PROF 55/50 (600 W)	Learn the price
2	JILEX Vodomet PROF 110/110 (1800 W)	Learn the price
3	JILEX Vodomet PROF 55/75 (900 W)	Learn the price
Top 3 best pumps for a well of 15-20 m depth
1	BELAMOS 3SP 60/1.8 (600 W)	Learn the price
2	UNIPUMP ECO 2 (750 W)	Find out the price
3	DELTA NP2-55/60 (900 W)	Find out the price

How to choose a borehole pump?

When buying a pump for a well in the first place pay attention to the following parameters:

Water purity. There are models that are installed only in clean sources, there are pumps equipped with additional filters for muddy wells or sandy wells.
Capacity .. Reflected in the number of cubic meters of water pumped per hour. This should be enough for all household needs. Also allows you to find out how many points can be connected to a single well.
Depth. Here, start from the depth of your well.
Pressure (maximum) .. A measure of the height to which the water will rise from the source. Be sure to take into account the distance of the well from the water supply.
Protection. This includes overheating and overload protection, provided by a thermostat. Dry run protection, if necessary, can be installed by yourself using a float switch.

Top 4 best borehole pumps by price, quality and reliability for 2021-2022

Vodoley BCPE 0,5-50U.

One of the most reliable submersible models for placement in wells up to thirty meters.

The manufacturer states that the service life is 6 years, but users indicate that the pump is able to work for 10 years. And it is also a universal device that can be used and for the organization of an automatic water supply system, installation in drinking wells and springs, as well as household tanks.

The pump provides up to 30 liters per minute or 3.6 cubic meters per hour. It consumes 1.1 kW of energy and is virtually silent.

The winding has a built-in thermal relay that protects the motor from overheating.

If the relay is triggered - the operation of the system automatically stops and activates only after the temperature drops.

In the package there is no protection against dry running, but the device can be installed separately, so there is no need to monitor the water level in the well. The pump is equipped with a cable and a cable length of 50 meters each.

Main characteristics:

Pressure (max), m - 75.
Pumping capacity - 3,6 cubic m/hour.
Power - 1140 watts.
Water temperature - 35.
Weight - 16,3 kg.

Advantages of

reliable device;
universality of use;
low noise level;
high performance;
reliable protection against overload.

Disadvantages

were not found.

Vodolei BCPE 0,5-32U (820 W)

Thanks to the production of the housing and the internal structure of this model in environmentally friendly The pump can be used in sources with clean drinking water..

The device is equipped with a fine filter, so it cannot be placed in muddy and silt-laden wells.

The pump can reach a depth of up to 10 metres and pumps up to 3.6 m³/h thanks to the motor power of 820 W.

At the same time, the maximum head is 47 meters. Such a head makes it possible to provide the house with water not only for drinking, but also for supplying to household appliances, various household needs and watering the garden.

The main body is made of stainless steel, and some of the motor elements - from brass and durable food plastic, so the pump will last a long time and will not cause troubles with frequent breakdowns.

By the way, the device is fully repairable. Thermal relay protects the motor from overheating, the kit includes a remote control.

Main characteristics:

Head (max), m - 47.
Flow capacity, cu. m/hour - 3,6.
Power, W - 820.
Water temperature, °C - 35.
Body weight - 11,7 kg.

Advantages of

good performance indicators;
environmentally friendly materials, suitable for drinking water;
remote control;
cable 32 meters;
good pressure.

Disadvantages

not suitable for deep wells;
no protection against dry running.

Aquario ASP 1E-100-75 (1250 W)

A pump for wells, designed for immersion to a depth of 50 meters with the maximum head up to 100 meters and pumping for an hour 3 cu.m..

By the way, the pump can make up to 30 starts per hour. The pump is only suitable for use with clean water, does not tolerate high sand particles and can clog, which then leads to breakdown.

The oil used in the motor is of the white medical grade, completely safe for the body and suitable for drinking water.

There is protection against overheating, the motor is cooled by the jet of water that passes through it during operation.

There is a built-in condenser and thermostat that shuts down the unit when it overheats.

Includes a long, 60-meter mains cable, so you can connect to a power source without using an extension cord.

Main features:

Immersion depth - 50
Pressure (max) - 100 m.
Flow rate - 3.
Power capacity, W - 1250.
Water temperature, °C - 35.

Advantages of

is suitable for deep wells;
overheat protection;
long mains cord;
a long service life.

Cons

were not found.

Grundfos MQ 3-35 (850 W)

This model refers to the surface models of pumping stations. The motor power of the 850 W motor for an hour pumps up to 3 cubic meters of water with a maximum head of 35 meters.

Additional functions include a pressure increase if necessary.

The pump is submersible up to a depth of 8 meters, connects to the network with a voltage of 220/230 V, does not need to install a stabilizer, if the voltage drop is rare and is assessed as insignificant.

The work runs quietly, the noise level during start-up does not exceed 55 dB. There is an electronic control of the water level in the well, protection against dry running and overheating.

The motor is cooled by the jet of water that runs through it. Its temperature should not exceed 35 degrees Celsius. The housing is made of stainless steel and is resistant to mechanical stress.

Main characteristics:

Pressure (max), m - 35.
Flow capacity, cubic meters/hour - 3.
Power capacity - 850 W.
Water temperature, °C - 35.
Water temperature - 35. Weight, kg - 13 kg.

Advantages of

good performance;
good safety system;
there is an electronic control of the water level;
no noise.

Cons

The cord is only two meters.

Top 3 best inexpensive borehole pumps

Vodolei BCPE 0,32-40U

As a budget model for country houses, you can use this model from a well-known brand With a 680 W motor.

When properly connected, a head of 60 meters and about 3 cubic meters per hour of clean water is provided.

Such a pump is also suitable for creating an automatic water supply system (with the additional installation of a non-return valve), and for irrigation or garden irrigation.

The pump is not afraid of power surges and provides constantly good water pressure. However, with permanent problems with the electricity supply, it is better to take care in advance about the installation of a stabilizer.

The device is equipped with a 40-meter long mains cable, which eliminates the need to use an extension cord.

There is protection against overheating, provided by a built-in thermostat.

Basic characteristics:

Pressure (max), m - 60.
Flow capacity, cbm/h - 3.
Power capacity, W - 680.
Water temperature, °C - 35.
Water temperature - 35. Weight 12,2 kg.

Pros of

budget price;
long cable;
good performance.

Cons

no dry run protection.

UNIPUMP ECO 0 (370 W)

Another budget model of pump for wells with a diameter of 10 cm or more.. Characterized by low It features low power consumption and good capacity values - the pump can transfer up to 4.8 m³ pure water at a temperature of no more than 35 degrees Celsius per hour.

The pump is vertically mounted, the housing is made of corrosion-resistant stainless steel, which means that the pump will operate for many years..

The internal mechanism is assembled from environmentally friendly materials, so you can not be afraid to use such a device to work with drinking water.

The immersion depth is 20 meters, installation and use is as simple as possible, the pump does not make noise during operation. There is a soft start of the motor and protection against overheating.

Main characteristics:

Pressure (max), m - 35.
Pumping capacity, cubic m/hour - 4.8.
Power, W - 370.
Water temperature, °C - 35.
Weight, kg - 11,5.

Advantages of

good performance indicators;
reliable construction;
economical power consumption.

Cons

short cord - 10 meters;
Only for pure water (not more than 100 g of impurities per cubic meter).

Vodolei BCPE 0,5-16U.

This is the smallest model in the Vodoley line, which does not affect the pump performance.

The 400 Watt motor pumps up to 3.6 cubic meters of water with a maximum head of 27 meters.

The device is used in wells with a diameter of 11 cm and clean water with a minimum of impurities.

The engine starts smoothly with a gradual acceleration, there is protection against overheating - the thermal relay will stop the system when reaching a critical temperature.

The pump has a low noise level during operation.

Like all centrifugal pumps, it does not create vibrations, does not clog the well and does not provoke filling of the well filter, and therefore does not reduce the quality of drinking water.

The manufacturer offers a cord, supplied by the manufacturer, of 16 meters.

Main characteristics:

Pressure (max), m - 27.
Flow capacity, cubic m/hour - 3,6.
Power, W - 400.
Water temperature, °C - 35.
Weight - 7,7 kg.

Advantages of

compact and light-weight
good performance;
economical power consumption;
Soft start of the motor.

Cons

The cord is short, 16 meters;
no protection against dry running.

Top 3 best pumps for a well depth of 40 m

Aquario ASP 1E-55-75 (700W)

If you are the owner of a deep well with a diameter of 10 cm, then you should consider this model submersible pump with vertical installation.

Thanks to the motor power of 700 watts for an hour pumped to 3 cubic meters / m with a maximum head of 60 meters. The immersion depth of this model is 50 meters, the device is designed to work with clean water, the temperature of which does not exceed 35 degrees.

The casing is made of stainless steel, it is not afraid of corrosion, which indicates a long service life of the pump.

A non-return valve prevents the discharge of water through the pump into the well after the pump is stopped.

The use of environmentally friendly materials allows you to use the device to pump drinking water to a private home or cottage.

There is a built-in thermal switch, which protects the motor from overheating and does not allow it to start before the system is completely cooled down.

Main characteristics:

Immersion depth - up to 50 meters.
Pressure (max) - 60.
Flow capacity - 3. m/hour.
Power capacity - 700 watts.
Water temperature, °C - 35.

Advantages of

the cord - 35 meters;
good performance;
there is a thermal switch;
does not make a noise when working.

Cons

no protection against dry running.

Aquario ASP 1.5C-60-75 (920 W)

Submersible dacha or cottage pump with a maximum immersion depth of up to 50 meters and a jet head of 77 meters stream head of 77 meters.

Suitable for installation in a well or a well with up to 120 grams of sand per cubic meter. Performs up to 30 starts per hour, provides water up to 3 cubic meters, while consuming 920 watts.

Works quietly, is very easy to install, supplemented by a power cord length of 45 meters.

Also included is a remote control. The pump has a very simple construction, consisting of a single-phase electric motor and a pump made of high quality polymers in a stainless steel casing.

The liquid is drawn in from the middle of the housing and is therefore advantageous in the presence of turbidity on the bottom.. Not afraid of power surges, so the installation of a stabilizer is not required.

Main features:

Head (max), m - 77.
Flow capacity - 3.
Power, W - 920.
Water temperature, °C - 35.
Sand content - up to 120 grams per cubic meter.

Advantages

Reliable design by the Italian manufacturer;
Good pressure and high efficiency;
full maintainability;
long operational life.

Cons

dimensions are larger than indicated in the technical passport of the manufacturer.

VICHR SN-60 (800 W).

Pump for wells and wells with a diameter of 75 mm, which pumps low-polluted or clear water to a private house or a garden plot (watering/irrigation).

Reaches depths up to 50 meters, maximum head up to 60 meters. For an hour is pumped about 3 cubic meters due to the motor power of 800 watts.

Is protected against overheating, the thermostat does not allow the engine to work when reaching a critical temperature.

The casing is made of stainless steel and the pumping part is chromeplated.

This helps the pump to provide reliable, trouble-free operation and a long service life.

The water intake in this unit is in the middle, between the motor and the impeller assembly. To such a pump, you can safely connect 2-3 points of private water supply and provide your home with clean water.

Main characteristics:

Immersion depth - up to 50 meters.
The head (max), m - 60.
Cubic meter/hour capacity - 3.
Power - 800 W.
Water temperature, °C - 35.

Advantages of

good performance;
rugged housing;
quiet operation;
suitable for deep and narrow wells.

Cons

short cord - 20 meters.

Top 3 best pumps for a well depth of 25-30 m

JILEX Vodomet PROF 55/50 (600 W)

Submersible pump for wells and boreholes with clean and cool water for automatic watering of vegetable garden or orchard..

The 600 W motor provides up to 50 m of head, pumping up to 3.3 cubic meters per hour.

The pump can be submerged to a depth of up to 30 meters. All operation of the pump is automated, there is no need to monitor the water level in the source, as the model is equipped with a float switch.

Note that to create a full automation of the water supply in a private home you will need to buy some additional parts.

The pump is supplied with a 20 meter long cable and is connected to 220/230 V.

Regular power surges are poorly tolerated, so it is recommended to install a stabilizer, so the motor does not burn out. The pump housing is made of stainless steel, not afraid of rust and provides a long service life.

Main characteristics:

Immersion depth - up to 30 meters.
Pressure (max) - 50 m.
Pumping capacity - 3.3 cubic m/hour.
Power, W - 600 W.
Water temperature, °C - 35.

Advantages of

it provides a good head of water;
it does not make any noise;
saves energy;
high efficiency.

Cons

fragile plastic components;
short mains cord.

JILEX Vodomet PROF 110/110 (1800 W)

The model is easy to use and install, is a centrifugal pump with multistage cleaned for immersion to a depth of 30 m..

The pump has a washed motor, condenser and floating impellers. The device is used to pump exceptionally clean water from wells and wells with a diameter of 11 centimeters or more.

Buyers note the high quality of the assembly, due to which the pump will serve for a long time without failures.

The housing of the device and all bearings used are made of stainless steel, wheels - of bronze, seals - of ceramic-metal.

One of the advantages is the long mains cable (70 metres), so that the pump can be connected directly to the power supply without an extension cord.

It tolerates slight power surges without the need for an adjustable regulator.

Main characteristics:

Immersion depth - 30 meters.
Head (max), m - 110.
Flow capacity, cu. m/hour - 6,6.
Power capacity, W - 1800.
Water temperature, °C - 35.

Advantages of

good performance;
long mains cable;
complete maintainability.

Disadvantages

high price.

JILEX Vodomet PROF 55/75 (900 W)

Reliable pump for a well or well, which is designed to supply water to the house, A reliable well or borehole pump designed for water supply to a house with a considerable number of residents..

Suitable for installation in the source with diameter from 10 cm, can pump exceptionally clean water, since it is not equipped with fine filters. Large particles can cause clogging and motor failure.

The pump is submersible down to a depth of 30 meters, pumping 3.3 cu.m in one hour with a maximum head of 75 meters.

For proper, stable, long-lasting operation, care should be taken in advance to stabilize the voltage, as the motor does not tolerate regular surges and can fail.

The manufacturer in the technical passport specifies a life of three years, but buyers claim that the pump is able to work twice as long.

Main characteristics:

Pressure (max), m - 75.
Pumping capacity, cubic m/hour - 3.3.
Power, W - 900.
Water temperature - 35.
Weight - 11,7 kg.

Advantages of .

Able to withstand minor voltage fluctuations;
High and stable pressure;
good performance;
no noise at work.

Cons

regular power surges require a stabilizer.

Top 3 best pumps for a well depth of 15-20 m

BELAMOS 3SP 60/1.8 (600 W)

One of the main advantages of the model, which is noted by buyers, is Easy maintenance and fully repairable - no need to go to a service center to replace the screw mechanism, you can do it yourself.

The 600-watt motor can handle up to 20 starts per hour, pumping about 1.8 cubic meters/m3 of clean water at temperatures from zero to 35 degrees. The maximum head is up to 60 meters.

The pump is used for individual water supply systems, creation of irrigation or irrigation.

It is installed in wells and wells with a diameter of 8 cm, can be placed in natural sources. There is a built-in thermal protection of the engine, which is in an oil bath for better cooling and protection against water.

The main characteristics:

Head (max), m - 60.
Flow capacity, cbm/h - 1.8.
Power, W - 600.
Water temperature, °C - 35.
Weight - 9,7.

Advantages of

a good pressure;
it does not overheat;
low noise level;
universality of use.

Disadvantages

no protection against dry running.

UNIPUMP ECO 2 (750 W)

The pump is made of environmentally friendly materials and can therefore be Not only for domestic use, but also for drinking water.

Does not make any noise when working, connected to 220/230 V voltage. Installed in wells and wells with a diameter of 11 cm, can participate in the organization of irrigation or irrigation.

Good performance. With a depth of up to 20 meters it delivers up to 4.8 cu.m per hour with a head of 60 meters.

Not suitable for use in muddy or silt-laden water sources with a maximum total water impurity of 100g/m3.

Motor starts smoothly with a gradual increase in speed and is protected against overheating.. The power cable is 30 m long.

Main characteristics:

Pressure (max), m - 60.
Flow capacity, cbm/h - 4.8.
Power capacity, W - 750.
Water temperature, °C - 35.
Weight - 17 kg.

Advantages of

good performance;
no noise;
Sufficient cable length;
suitable for drinking water.

Disadvantages

no dry run protection;
no non-return valve.

DELTA NP2-55/60 (900 W)

Submersible pump with vertical installation and 900 W motor. The pump can be lowered in a depth of up to 15 meters. Down to a depth of 15 meters, is designed to pump clean water up to a temperature of 35 degrees.

Draws 3.3 cu.m in an hour with a maximum head of 60 meters.

The stainless steel casing is not afraid of corrosion and is able to withstand a long service life..

The pump belongs to the low-cost models, can be installed in private houses and cottages, in suburban areas, used for watering and irrigation of gardens / orchards.

The motor is cooled by the jet that passes through it, there is a thermal relay to stop the system in case of overheating.

No noise, easy to use and install. The device comes complete with a 30-meter-long cord.

Main characteristics:

Immersion depth - 15.
The head (max), m - 60.
Flow rate, cubic meters/hour - 3.3.
Power, W - 900.
Water temperature, °C - 35.

Advantages of

good performance;
low noise level;
high pressure.

Minuses

no protection against dry running.

What company to choose?

In order for the pump to serve for a long time and not cause trouble by constantly breaking, it is not recommended to save on quality.

Experts advise to choose among popular brands that have been proven over time.

They produce both pumps for wells and for wells. Their products are famous for good performance indicators and reliability.

In the rating of the best manufacturers lead such firms as Grundfos from Denmark, domestic VIKHR, Vodolei, Jileks, German Denzel, Karcher.

Customer reviews

{{ reviewsOverall }} / 5 Rating of owners (2 votes)

Rating of brand/model

Number of votes

Sort by:

Be the first to leave a review.

Verified

{{{review.rating_title }}}

{{{review.rating_comment | nl2br}}}

Add your review!

Helpful video

From the video you will learn what pump is better for the well: